Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Power and Ground Distribution > Wiring Harness > Component Information > Description and Operation > Table of Contents > Page 5541

Page 1
background image

Wiring Harness: Description and Operation
Crimping Pliers

Crimping Pliers

Crimping pliers (VAS 1978/1A) or crimping pliers (base tool) (VAS 1978/1-2) together with exchangeable head 0.35 - 2.5mm/2 (VAS 1978/1-1) or
exchangeable head 4.0 - 6.0mm/2 (VAS 1978/2A) from wiring harness repair kit is used to compress the crimp connections. 

Compressing crimp connections using (VAS 1978/1A). Refer to => [ Wire Break with Dual Repair Point ] See: Service and Repair/Procedures/Wire
Break With Dual Repair Point.

The following exchangeable heads can be obtained for (VAS 1978/1-2):

‹› Exchangeable head 0.35 mm2 - 2.5 mm2 (VAS 1978/1-1)

‹› Exchangeable head 4.0 mm2 - 6.0 mm2 (VAS 1978/2A)

‹› Exchangeable head for JPT-terminal (VAS 1978/9-1)

In conjunction with (VAS 1978/9-1), crimp pliers is used to crimp terminals onto individual wires when repairing wiring cross-sections up to 0.35
mm2. Refer to => [ Wires with Diameter up to 0.35 mm, Repairing ] See: Service and Repair/Procedures/Wires With Diameter up to 0.35 mm 2,
Repairing. 

Changing exchangeable head:

-

Open crimp pliers completely.

-

Disengage both locking pins - arrows - from crimp pliers basic tool.

-

Insert the required exchangeable head from above - arrow  - in crimp pliers basic tool.

Power and Ground Distribution > Wiring Harness > Component Information > Description and Operation > Table of Contents > Page 5541

[PREV PAGE] [NEXT PAGE]