Volkswagen Workshop Manuals
Passat Sedan V6-3.6L (BLV) (2008)
Power and Ground Distribution > Wiring Harness > Component Information > Description and Operation > Table of Contents > Page 5545
Release Tool Set
The release tool set (VAS 1978/35) is used to release the various primary and secondary locking mechanisms on VW-group vehicles. The set consists
The application of the correct release tools to the respective locks can be found in the table in user instructions for VAS 1978/35.
Crimping pliers (VAS 1978/1A) or crimping pliers (base tool) (VAS 1978/1-2) together with exchangeable head 0.35 - 2.5mm/2 (VAS 1978/1-1) or
Compressing crimp connections using (VAS 1978/1A). Refer to => [ Wire Break with Dual Repair Point ] See: Service and Repair/Procedures/Wire
The following exchangeable heads can be obtained for (VAS 1978/1-2):
‹› Exchangeable head 0.35 mm2 - 2.5 mm2 (VAS 1978/1-1)
‹› Exchangeable head 4.0 mm2 - 6.0 mm2 (VAS 1978/2A)
‹› Exchangeable head for JPT-terminal (VAS 1978/9-1)
In conjunction with (VAS 1978/9-1), crimp pliers is used to crimp terminals onto individual wires when repairing wiring cross-sections up to 0.35
Changing exchangeable head:
Open crimp pliers completely.
Disengage both locking pins - arrows - from crimp pliers basic tool.
|[PREV PAGE] [NEXT PAGE]|