Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Power and Ground Distribution > Wiring Harness > Component Information > Service and Repair > Procedures > Page 5586

Page 22
background image

-

Reinstall the wiring eyelet with the specified torque.

‹› Optimal contact is ensured if the bolted components are tightened to the specified torque after cleaning.

-

Apply protection material to the connection. Refer to => [ Protecting Connections ] See: Description and Operation/Protecting Connections.

-

Reconnect the battery.

CAUTION!
Risk of injury. Observe warning notes and safety precautions. Refer to => [ Battery Safety Precautions ] See: Starting and
Charging/Battery/Service Precautions/Battery Safety Precautions and => [ Battery Safety Designation ] See: Starting and
Charging/Battery/Service Precautions/Battery Safety Designation!

-

Reprogram the window regulators, enter the radio code, set the clock and, if necessary, recode control modules that have error messages.

Threaded Connections, Repairing

Threaded Connections, Repairing

Special tools, testers and auxiliary items required

‹› Torque wrench 5-50Nm (VAG1331)

‹› Do not use rust remover, contact spray or grease because the lack of friction will cause the torque to be exceeded when installing and this will lead

to the threaded connection breaking.

‹› The gray sanding pads are for slight contamination and suitable for "soft surfaces". The red sanding pads are for heavy contamination and suitable

for "hard surfaces".

CAUTION!
Risk of injury. Observe warning notes and safety precautions. Refer to => [ Battery Safety Precautions ] See: Starting and
Charging/Battery/Service Precautions/Battery Safety Precautions and => [ Battery Safety Designation ] See: Starting and
Charging/Battery/Service Precautions/Battery Safety Designation!

-

Disconnect battery.

-

Loosen the cap nut and remove the wiring eyelet from the threaded connection.

Power and Ground Distribution > Wiring Harness > Component Information > Service and Repair > Procedures > Page 5586

[PREV PAGE] [NEXT PAGE]