Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Powertrain Management > Computers and Control Systems > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster With Timing Chain, Installing > Page 3385

Page 7
background image

-

Position the camshafts in the cylinder head to TDC for cylinder 1.

The camshaft lobes - A - for cylinder 1 must face each other.

-

Install the (T10068 A) into both camshaft grooves. If necessary, slightly rotate the camshaft back and forth using an open end wrench.

-

Secure the position of the high pressure pump diver pinion using (T10363). The mark - A - on the on high pressure pump sprocket must be at the
top.

Powertrain Management > Computers and Control Systems > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster With Timing Chain, Installing > Page 3385

[PREV PAGE] [NEXT PAGE]