Volkswagen Workshop Manuals
Passat Sedan V6-3.6L (BLV) (2008)
Powertrain Management > Computers and Control Systems > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster With Timing Chain, Installing > Page 3392
Remove the upper and lower coolant pipes from the timing chain cover.
Remove the timing chain cover bolts - arrows - from the cylinder head.
‹› Bolts - A - are not on vehicles with a mechanical vacuum pump.
‹› Do not completely remove the camshaft adjustment valve bolt so that the valve is not tilted when removed.
Loosen the camshaft adjustment valve bolts - arrows - approximately 3 mm (5 turns) using (T10072).
|[PREV PAGE] [NEXT PAGE]|