Passat Sedan V6-3.6L (BLV) (2008)
Parking Brake Release Switch: Service and Repair
Parking Brake Button
Parking Brake Button
The following components are integrated in the Electro-Mechanical Parking Brake Button E538 :
-
Electro-mechanical Parking Brake Indicator Lamp K213
-
-AUTO HOLD- Indicator Lamp 2 K238
Special tools, testers and auxiliary items required
-
Trim removal wedge VAS 3409
NOTE: When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ( trim
removal wedge 3409, screwdriver) will be positioned, using commercially available adhesive tape.
Removing:
-
Switch off ignition and all electrical components and move ignition key or start button into position 0 (preliminary engaged position).
-
Remove side cover - 1 - of instrument panel, do this by inserting trim removal wedge 3409 or a screwdriver into recess - 2 - and pry off cover - 1 -
in - direction of arrow -.
-
Push Electro-Mechanical Parking Brake Button E538 - 1 - out of instrument panel from rear.