Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Sensors and Switches > Sensors and Switches - Restraint Systems > Seat Occupant Sensor > Component Information > Service and Repair > Passive Occupant Detection System (Overview) > Page 1092

Page 1
background image

Seat Occupant Sensor: Service and Repair
Passive Occupant Detection System

Passive Occupant Detection System

Seat occupied recognition controls automatic passenger airbag deactivation. 

This equipment is only installed on vehicles released in the USA. 

=> [ Passive Occupant Detection System Components, Manual Seats ] 

=> [ Passive Occupant Detection System Repair Kit, Manual Seats ] 

=> [ Passive Occupant Detection System Components, Power Seats ] 

=> [ Passive Occupant Detection System Repair Kit, Power Seats ] 

Passive Occupant Detection System Components, Manual Seats

CAUTION!
Observe safety precautions when working on seat occupied recognition. Refer to => [ Passive Occupant Detection System Safety
Precautions ] See: Passive Occupant Detection System (Overview).

‹› Seat cushion, mat for seat occupied recognition, control module and pressure sensor must only be replaced together. Components are

complementary and must not be separated!

‹› Only disconnect wiring harnesses mentioned in the following description! 

-

Disconnect vehicle battery.

-

Mount the (VAS 6136) on the (VAS 6095).

-

Remove front seat. Refer to => [ Front Seat ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seats

-

Attach the seat to the (VAS 6136).

-

Remove the front seat belt latch. Refer to => [ Front Seat Belt Latches ] See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair

-

Remove seat cap. Refer to => [ Cover Cap ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seats

-

Remove height-adjustable seat trim. Refer to => [ Height-Adjustable Seat Trim ] See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seats

-

Remove bracket and actuating lever, trim of partially electric/height adjustable seat. Refer to => [ Power Height-Adjustable Seat Trim Bracket and
Operating Lever ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seats

-

Depending on vehicle equipment, operate locking mechanisms of individual harness connectors and disconnect the corresponding wiring harnesses
from main wiring harness - 1 -.

-

Loosen main wiring harness from seat frame.

-

Disconnect individual harness connectors from wiring harness of backrest - 2 - on seat frame.

-

Disengage wiring harness of backrest from seat frame.

Sensors and Switches > Sensors and Switches - Restraint Systems > Seat Occupant Sensor > Component Information > Service and Repair > Passive Occupant Detection System (Overview) > Page 1092

[PREV PAGE] [NEXT PAGE]