Passat Sedan V6-3.6L (BLV) (2008)
Suspension Control Module: Service and Repair
Electronic Damping Control Module
Component location: behind the right side luggage compartment trim
Switch off all electrical consumers.
Remove the ignition key.
Remove the right luggage compartment side trim.
Remove the electronic damping control module (J250) - 1 - from the compartment.
Release and remove the connector - 2 -.
Installation is the reverse of removal, with special attention to the following:
Perform a basic setting on the adaptive chassis DCC. Refer to => [ Adaptive Chassis DCC, Basic Setting ] See: Suspension/Suspension Control (
Automatic - Electronic )/Testing and Inspection/Programming and Relearning.