Passat Sedan V6-3.6L (BLV) (2008)
/Page-1099003.png)
-
Install the overflow tube - C -. Refer to => [ Fastener Tightening Specifications ] See: Valve Body/Specifications/Fastener Tightening
Specifications - Gears, Hydraulic Controls.
-
Replace the seal - B - for the inspection plug - A -.
-
Only hand tighten the inspection plug - A - with new seal - B -.
-
Add ATF, check the ATF level and top off if necessary. Refer to => [ Automatic Transmission Fluid Level, Checking and Filling ] See: Fluid -
A/T/Service and Repair/Automatic Transmission Fluid Level, Checking and Filling.
