Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Shifter A/T > Component Information > Service and Repair > Procedures > Page 3949

Page 3
background image

-

Secure the button against being pushed in, using a tie strap or wire.

-

Unclip the cover.

-

Disengage the handle.

-

After installing, engage the knob again, push the plastic part beneath the handle downward again.

-

Transport protection can be removed on new handles knobs after disengaging.

-

Disconnect the connector from the cover.

-

Remove the handle upward

Passat and CC Specific Components

Passat and CC Specific Components

Selector Mechanism with Lever

‹› After installation, the cable must be checked for ease of movement and must be adjusted.

-

Remove the center console.

-

Remove the cable from the transmission. Refer to => [ Selector Lever Cable ]. See: Service and Repair/Removal and Replacement/09M,09MA
Transmission/Passat and CC Specific Components/Selector Lever Cable

-

Remove the exhaust system components from underneath the heat shield.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Shifter A/T > Component Information > Service and Repair > Procedures > Page 3949

[PREV PAGE] [NEXT PAGE]