Passat Syncro Wagon V6-2.8L (ATQ) (2000)
8. Brake carrier with guide pins and protective caps
-
Supplied as replacement part assembled with greased guide pins
Front Caliper Piston, Removing and Installing
Front caliper piston, removing and installing
Special tools required
Removing
-
Push piston out of brake caliper housing with compressed air.
CAUTION: Place a wooden block in the caliper to prevent damage to the piston.
-
Remove seal using plastic wedge 3409 or equivalent.
CAUTION: When removing, use care to ensure that the cylinder bore is not damaged.
Installing
-
Clean piston surface and seal with clean solvent only.
-
Thinly coat piston and seal with lubricant G 052 150 A2 before installing.
-
Place protective seal with outer sealing lip on piston.