Passat Wagon L4-2.0L Turbo (BPY) (2008)
Wastegate Actuator: Service and Repair
Turbocharger Vacuum Diaphragm
Removing
-
Remove the turbocharger. Refer to => [ Turbocharger ] See: Service and Repair/Turbocharger.
-
Loosen the securing plate bolts on the turbocharger under the linkage.
-
Loosen the lock nut - 2 -.
-
Disconnect the linkage - 3 - from the turbocharger.
-
Remove the vacuum diaphragm - 1 - bolts - arrows - from the turbocharger.
Installing
Installation is performed in the reverse order of removal, noting the following:
-
Adjust the vacuum diaphragm. Refer to => [ Turbocharger Vacuum Diaphragm, Adjusting ] See: Adjustments.
-
Install the turbocharger. Refer to => [ Turbocharger ] See: Service and Repair/Turbocharger.
Tightening Specifications