Passat Wagon L4-2.0L Turbo (BPY) (2008)
Variable Induction Control Valve: Service and Repair
Intake Flap Motor With Intake Manifold Runner Position Sensor
Special tools, testers and auxiliary items required
-
Assembly tool T10118
-
Multi point socket T10347
-
Commercially available 1/4" reversible ratchet bit
-
T30 bit insert
Removing
-
Remove engine cover/air filter.
GTI
-
Remove pipe - A - and hose - B - - arrows -.
Continuation for All
-
Loosen the hose clamp - 1 -.
-
Remove bolt - 2 -.
-
Remove noise insulation.
-
Disconnect electrical connector - 3 -.
-
Remove the bolt - 4 -, pull the guide pipe off the charge air cooler and remove it downward.