Passat Wagon L4-2.0L Turbo (BPY) (2008)
-
Carefully mount the mounting bracket in a vise with protective jaws.
-
Remove the clutch pedal - 1 - from the mounting bracket - 3 -, to do so, remove the nut - 2 - and pull out the bolt - 5 -.
-
Swivel the clutch pedal slightly toward the front and remove the over center spring - 4 - from the mounting bracket.
-
Release the clutch pedal from the master cylinder using the (T10005).
-
Remove the clutch pedal.
Installing
Install in reverse sequence; note the following points:
‹› Replace the self locking nut.
-
Install the mount - 2 - onto the master cylinder operating rod - 1 -.