Passat Wagon V6-2792cc 2.8L DOHC (1994)
Camshaft: Service and Repair
REMOVING
-
Set engine to TDC for cyl. 1 mark by turning engine in running direction at vibration damper bolt.
-
Remove cylinder head cover.
-
Remove ignition coil (N152).
-
Remove double chain tensioner.
-
Remove camshaft sprocket cover.
-
Remove camshaft mounting bolts.
NOTE: Counter-hold camshaft using only 24 mm open-end wrench -arrow-. The camshaft fixture 3268 must not be in place when you tighten
or loosen chain sprockets.
-
Remove camshaft sprockets.
Fig. 1
-
Mark double chain before removing (use paint, arrow pointing in engine running direction).