Passat Wagon V6-2792cc 2.8L DOHC (1994)
Steering Gear: Service and Repair
Power steering gear, removing/installing
Tie rod ends, pressing out
Use commercial puller (A), such as Kukko 128/2
Universal joint shaft bolt (arrow), loosening
Remove and discard hydraulic oil from power steering reservoir
Use suction device, e.g. Fluid Evacuators Co. Model EX-1, or equivalent
Or remove suction hose at vane pump and drain
Engine/transmission, supporting
Install 10-222A and 10-222A/1
CAUTION: Bases 10-222 A/1 are adapted to the angle of the body. If the previous bases are used, an accident could occur.
Remove steering gear boot from seat
Remove bolts from transmission mount
Lower engine/transmission assembly in order to separate shaft halves
Power steering gear, removing
Disconnect hydraulic lines to power steering gear
Seal line openings with plastic bag and adhesive tape
