volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Installing > < Removing and installing brake master cylinder
Removing
Removing
–  Note or request radio code on vehicles with coded radio if necessary.
–  Disconnect battery
Vehicles with ABS or ABS/EDL
–  Remove control unit and hydraulic unit → Chapter.
Continuation for all vehicles
–  Lay out sufficient lint free clothes in area of plenum chamber, engine and gearbox.
–  Draw off as much brake fluid as possible from brake fluid reservoir using a suction bottle.
–  Pull connector off brake fluid level switch.
–  Unscrew brake lines on brake master cylinder and seal brake lines with plugs from repair kit Part No. 1H0 698 311 A.
–  Unscrew brake master cylinder nuts.
–  Carefully remove brake master cylinder from brake servo.
   

Installing > < Removing and installing brake master cylinder