volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Pre-bleeding brake caliper > < Removing

Polo Mk3

Installing
Installing
–  The surface of the piston and seal must be cleaned only with methylated spirits and then dried.
–  Coat piston and seal thinly with assembly paste G 052 150 A2 before inserting.
–  Insert seal in brake caliper.
   
–  Place outer sealing lip of protective cap on the piston
  V47-0423
–  Insert inner sealing lip into groove in cylinder using wedge 3409.
When doing this hold piston in front of brake caliper.
  N47-0081
–  Screw piston into housing by turning knurled wheel clockwise.
t  Fit resetting and removal tool 3272 so that collar -arrow- of tool rests on brake caliper.
t  If piston is difficult to move, use a 13 mm open jaw spanner on flats -arrow A- provided for this purpose.
–  Insert brake pads.
  N46-0013

Pre-bleeding brake caliper > < Removing