volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Dismantling and assembling heated air and fresh air controls > < Removing

Polo Mk3

Installing
Installing
   
–  Place control motor -2- on fresh air and air recirculation flap lever -arrow B-.
The fresh air and air recirculation flap lever must be moved by hand depending on the position of the control motor. To do so, remove fresh air blower -V2- → Chapter.
–  Turn control motor -2- in direction of -arrow D-.
–  Fit securing bolt -3-.
–  Connect voltage supply connector.
  N80-0236

Dismantling and assembling heated air and fresh air controls > < Removing