volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Parts of cooling system engine side > < Removing and installing parts of cooling system

Polo Mk3

4-cyl. Diesel engine, Mechanics
Removing and installing parts of cooling system
Parts of cooling system body side
 
N19-0044
  • Radiator
    • ◆ Removing and installing
      =>Page 19-17
    • ◆ After replacing renew entire coolant
  • Radiator fan (V7)
  • Lock carrier
  • 10 Nm
  • Cable/line guide
  • Fan retainer
    • ◆ For radiator fan (V7)
 
N19-0044
  • Lower coolant hose
    • ◆ To thermostat housing
      =>Page 19-6 , Item 12
  • Connector
  • Upper coolant hose
    • ◆ To connection
      =>Page 19-8 , Item 18
  • Expansion tank
    • ◆ Perform leak test of cooling system using cooling system tester V.A.G 1274 and adapter V.A.G1274/3
  • Cap
    • ◆ Check with cooling system tester V.A.G 1274 and adapter V.A.G 1274/4
    • ◆ Test pressure 1.4...1.6 bar
  • Cover
 
N19-0044
  • To cylinder head
  • To coolant pipe
  • Thermo-switch (F18), 35 Nm
    • ◆ For radiator fan (V7)
    • ◆ Switching temperatures:
      Stage 1
           on: 92...97 °C
           off: 84...91 °C
      Stage 2
           on: 99...105 °C
           off: 91...98 °C

Parts of cooling system engine side > < Removing and installing parts of cooling system