|
Servicing drive shaft
Servicing drive shaft with constant velocity joint
Special tools and workshop equipment required
-
◆ VW 161 A Circlip pliers
-
◆ VW 408 A Press tool
-
◆ VW 522 Support sleeve
-
◆ 40-204 A Tensioner
-
◆ V.A.G 1682 Clamp
Greasing joints
-
◆ Grease quantity: Outer and inner constant velocity joint, 90 grammes each of G 000 603.
-
◆ Greasing outer joint: press half of the grease into the joint, and the other half evenly into the bellows.
-
◆ Greasing inner joint: press half of the grease into the inner joint from both sides, the other half evenly into the bellows.
-
◆ When renewing the bellows grease joint as required.
|
