Volkswagen Workshop Service and Repair Manuals

Notes:

• ◆ Always renew self-locking nuts and bolts.
• ◆ Welding and straightening work on steering components is not permitted.

• Support
• Support ring
• ◆ With washer
• Steering lock housing
• ◆ Removing and installing lock cylinder

=> Electrical system; Repair group 96; Servicing steering column switch

• Steering column switch
• ◆ Servicing

=> Electrical system; Repair group 96; Servicing steering column switch

• Spring
• Splined adapter sleeve
• Hexagon nut, 50 Nm
• Shear bolt
• ◆ Tighten until head shears off
• ◆ Drill out to remove

• Spring
• Mounting bracket
• ◆ Before assembling, coat side sliding surfaces with MOS 2 grease

• Locking plate
• Hexagon nut, 8 Nm
• ◆ Left-hand thread
• Hexagon nut, 6 Nm
• Clamping bolt with left-hand thread
• Slide rod
• Bolt
• Washer
• Packing plate
• Column tube
• Operating lever
• Steering column

• Self-locking hexagon nut, 25 Nm
• Lower spring
• Hexagon bolt
• Steering column universal joint shaft
• Captivated nut
• ‒ Remove captivation from joint and replace nut
• ◆ Do not re-use captivation
• ◆ Use self-locking nut like item -22 -
• Hexagon bolt, 30 Nm
• Lower steering column bearing
• ◆ Pull out=>Page 48-30
• ◆ Drive in with synthetic head hammer
• Bearing bracket
• Hexagon nut, 6 Nm