volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Adaptation of service interval data when renewing the dash panel insert > < Adaption

Polo Mk3

Adapting distance travelled display
Adapting distance travelled display
  Note
t  The following sequence is described for the fault reader -V.A.G 1551-, the sequence described in the chapter for the “vehicle diagnosis, testing and information system may also be used” → Chapter.
t  The total distance travelled by the vehicle can be read off the defective dash panel insert or determined using the service schedule.
t  The total distance travelled displayed on the new dash panel insert must not be more than 100 km before the adaptation.
t  The total distance travelled to be transferred to the new dash panel insert must exceed 100 km.
t  Adaptation of the total distance travelled is only possible once and then only in a positive direction.
t  The adaptation can be interrupted with the C key of the fault reader -V.A.G 1551-.
t  It is not possible to correct an incorrect entry once it has been confirmed. In this case the dash panel insert would need to be exchanged for a new one.
t  The adaption must take place in kilometres for countries with a display in miles. Therefore convert adaption value from miles to kilometres.
Example:
The defective dash panel insert has an odometer display of 89627 km. This kilometre reading can be transferred to the new dash panel insert as follows:
–  Initiate self-diagnosis of dash panel insert → Chapter.
   
Indicated on display:
–  Press keys 1 and 0. (10 selects the function “Adaption”).
  
Rapid data transfer                 HELP
Select function XX
Indicated on display:
–  Confirm entry with Q key.
  
Rapid data transfer                    Q
10 - Adaption
Indicated on display:
–  Press keys 0 and 9.
–  Confirm entry with Q key.
  
Adaption                                
Enter channel number XX
Indicated on display:
–  Move programme on with → key.
  
Channel  9      Adaption            0 ->
km - in steps of 10 km          <-1  3->
Indicated on display:
The last digit of the kilometre reading must be rounded up to the nearest 10 km.
A kilometre reading of 89627 produces an adaption value of: “0”, “8”, “9”, “6” and “3”
  
Channel 9        Adaption             0 
Enter adaption value XXXXX
X    Hundreds of thousands: 100000 ... 900000 km
 X   Tens of thousands: 10000 ... 90000 km
  X  Thousands: 1000 ... 9000 km
   X Hundreds: 100 ... 900 km
    XTens: 10 ... 90 km
     Ones: round up to next ten

–  Enter adaption value using keyboard.
   
Indicated on display:
–  Confirm entry with Q key.
  
Channel  9       Adaption            0 Q
Enter adaption value               08963
Indicated on display:
–  Press → key.
The entered kilometre reading now appears in the display of the dash panel insert. If the displayed kilometre reading is not OK, e.g. because it was entered incorrectly:
–  Press C key and enter correct adaption value again.
If the displayed kilometre reading in dash panel insert is OK:
  
Channel  9       Adaption        8963 ->
km - in steps of 10 km          <-1  3->
Indicated on display:
–  Confirm entry with Q key.
  
Channel  9       Adaption         8963 Q
Save changed value?
Indicated on display:
–  End adaption of the distance travelled with the → key.
ng für
  
Channel  9       Adaption        8963 ->
Changed value has been saved
Indicated on display:
–  End output (function 06) → Chapter.
  
Rapid data transfer                 HELP
Select function XX

Adaptation of service interval data when renewing the dash panel insert > < Adaption