Radio navigation system (RNS)
Radio navigation system (RNS)
- Before beginning repair work, perform the following steps:
-
‒ Switch off all electrical consumers.
-
‒ Switch off ignition.
-
‒ Pull out ignition key.
Notes:
-
◆ When faced with complaints it is absolutely necessary to know the functions and how to operate the radio/navigation system.
-
◆ Additional information
=> Operating instructions
=> Self-study programme No. 199
-
◆ The anti-theft coding is a fixed code.
=> Operating instructions
-
◆ When retrofitting, repairing or fault finding
=> Self-diagnosis
=> Current flow diagrams, Electrical fault finding and Fitting locations
=> Installation instructions
-
◆ A gyro-compass in the vehicle is set according to the installation position of the unit to ensure the navigation system functions perfectly. Therefore always observe the part number when exchanging a unit. An incorrect installation will cause the navigation system to operate with flaws.
-
◆ If the navigation system is producing inaccurate results, adapt the tyre circumference => Adapting components, navigation system Page 01-184
.
-
◆ When the battery is reconnected, check operation of electrical equipment (radio, clock and convenience electrics etc.) according to Workshop Manual or Owner's Manual.
|