New rear window (sedan) - prepare a new glass for assembly |
1 - | Buffers (self-adhesive) -6Y6 845 237 A- |
2 - | PUR primer coat (Application area for the adhesive cord) |
–
| Using a cloth with silicone remover - LSE 020 100 A3-, clean thoroughly the adhesive cord application area -1-, passing twice with the cloth soaked with the solution. |
–
| After a minimum drying time of five minutes, it is necessary to apply the activator -D 181 801 A1-, as in the glasses with preliminary coat. |
Buffer assembly dimensions → Fig. |
Rear window clearances → Fig.. |
|
|
|