–
| Unlock the fastening clip -2- by using
the Spatula -VW 037- and remove the drive
lever -3-. |
–
| Remove the lower lining of column A -1- using the Spatula -VW 037-. |
The installation occurs in the reversal sequence of removal,
observing the following instructions: |
Note t
| Before assembling, it is necessary to check the fastening clamp
for damages and, if necessary, replace them. |
t
| After the installation, check that the internal door packing
lip finishes the lower lining edges on A pillar -1-. |
|
|
|