| –
| Disengage the speed sensor cable connector -2-. |
| –
| Remove the screw -1- from the wheel roller bearing case. |
| –
| Remove the ABS speed sensor from the wheel roller bearing case. |
| For easier viewing, the brake disc is represented as removed. |
| –
| Before installing the speed sensor, clean the internal surface of the hole and apply Lubricating Putty -G 000 650 - around the sensor. See → Chemical Materials Manual. |
| –
| Place the speed sensor in the wheel roller bearing case and tighten the screw to 8 Nm. |
| –
| Connect the speed sensor with the speed sensor cable. |
| –
| Turn the steering wheel completely to the left and to the right and control the space available for the speed sensor cable. |
|
|
|
