Brake pedal - assembly overview

Make

Volkswagen

Model

Polo Mk4

Section

Brake systems › Brake, brake mechanics › Brake pedal - assembly overview

Running gearBrake pedal - assembly overview

Brake pedal - assembly overview   WARNING The brake pedal stroke must not be shortened with additional floor linings. Before mounting, all the support points must be lubricated with Grease -G 000 602-.   WARNING Always replace self-locking nuts and screws subject to angular torque

1 -

Support

2 -	Hexagonal head screw

3 -	Self-locking hex head nut

q

replace

q

28 Nm

4 -	Brake pedal switch -F47-

q	before assembling the Brake pedal switch -F47-, the brake pedal must be fitted with the servo brake operating rod → Anchor

q	remove and install → Chapter

5 -	Accelerator pedal

6 -	Brake pedal

7 -	Bearing bushing

8 -

Cap

9 -	Support pin

10 -	Self-locking hex head nut

q

replace

q

25 Nm

11 -	Servo brake

12 -	Front panel

13 -	Module support

14 -	Crash bar anchor

15 -	Hexagonal head screw

q

10 Nm

01 Steering & suspension