| After the test, the brake system must be bled with the filling and bleeding device connected. For this, a second operator is necessary: |
| –
| Strongly press and hold the brake pedal with your foot. |
| –
| Open the plug on the right side of the rear brake caliper. |
| –
| Press deeply the brake pedal to the stop. |
| –
| Close the plug while still holding the brake pedal. |
| –
| Slowly release the brake pedal. |
| This bleeding procedure must be carried out 5 times per brake caliper. |
| –
| Remove the plugs in the sequence determined and ventilate the brake cylinder/caliper. |
| 1 - Right rear brake cylinder/caliper |
| 2 - Left rear brake cylinder/caliper |
| 3 - Right front brake caliper |
| 4 - Left front brake caliper |
| A test drive must be carried out after the bleeding. This drive must include at least one ABS-controlled braking! |
|
|
|
