volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Selector lever and selector lever housing - service > < Gear selector mechanism - installation position

Polo Mk4

Selector lever knob and gaiter - remove and install
   
Selector lever knob and gaiter - remove and install
1 - Selector lever knob
q   Remove and install together with gaiter.
2 - Gaiter with frame
q   Remove from selector lever knob → Fig.
q   Connect to selector lever knob before installing → Fig.
q   Remove and install together with selector lever knob.
3 - Tightening sleeve
4 - Brace
q   To secure selector lever knob.
q   Install with the Pliers for braces - V.A.G 1275- on the selector lever knob → Item.
5 - Seal
q   If fitted, insert in centre console.

   
Disassemble and assemble selector lever knob gaiter
–  Turn cover inside out.
–  Carefully lever clamping sleeve -arrow- off using a screwdriver and pull the selector lever knob out.
Installation is carried out in the reverse sequence; when doing it, pay attention to the following:
–  Insert selector lever knob in gaiter.
–  Push clamping sleeve onto knob and engage.
–  Install selector lever knob and frame together.
  S34-0153

Selector lever and selector lever housing - service > < Gear selector mechanism - installation position