volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Output shaft - dismantle and assemble > < Table of adjustment shims

Polo Mk4

Check measurement
Check measurement
   
–  Install measuring appliance and dial gauge.
–  Rotate input shaft so that the taper roller bearings settle.
–  Press input shaft in direction of arrow.
–  Bearing play should be min. 0,01 ... max. 0,09.
  Note
If the bearing clearance cannot be measured, but input shaft play is perceptible and the input shaft turns freely, the adjustment is acceptable
  V35-1126

Output shaft - dismantle and assemble > < Table of adjustment shims