Volkswagen Workshop Service and Repair Manuals > Polo Mk4 > Engine | 4 - Cyl. diesel engine (with unit injectors) | Engine cylinder head, valve gear | Valve command unit - repair | Valve command shaft seal - remove and install

Installation

Note

Seal sealing rib must not be additionally lubricated or greased

–	Remove oil residues from valve command shaft neck with a clean cloth.

–	For installation of housing on command shaft cone use adhesive tape.

–	Carefully place sealing ring on command shaft.N15-0274

–	Pressure sealing ring with pressure piece of placing device 10-203 and screw M12×1, 5x65 up to the bumper.

–	Install indented belt, adjust → Chapter.

Volkswagen Workshop Service and Repair Manuals