volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Operation sequence > < Cylinder head - remove and install|Installation
Compression - check
   
Compression - check

Special tools and workshop equipment required
t  Spark plug wrench -3122B-
t  Torque wrench - 5 to 50 Nm ( enc. 1/2") -VAG 1331-
t  Cylinder bore tester - petrol/ethanol -VAG 1763-
Test conditions
l  The engine oil temperature must be at least 30°C.
l  Voltage of Battery -A- must be at least 11.5 volts.
l  All electrical components, such as lights and thermal rear window, must be turned off.
l  If the vehicle is equipped with air conditioning, turn it off.
   

Operation sequence > < Cylinder head - remove and install|Installation