volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Fuel pump (pre-supply pump)G6 - remove and install > < Part III
Cold start system components
Cold start system components
- Cold start system E-Flex
HCU – Control heating unit for glow plugs → Chapter.
   
1 - 10 Nm
2 - Fuel supply lines
q   Black with white mark.
q   Press the connector key to remove.
q   Make sure it is well fastened.
q   From the fuel filter.
3 - Fuel rail
q   To remove, disconnect earth wire from Battery -A-.
q   Remove and install, check jet form and injector sealing.
q   Check fuel pressure regulator → Chapter.
4 - Glow plug
q   To proceed with removal, remove the fuel distributor.
q   For the cold start system E-Flex.
q   Check → Chapter
q   Tightening torque = 18 Nm.

   

Fuel pump (pre-supply pump)G6 - remove and install > < Part III