Fuel supply system components - remove and install |
Note t
| The hose connections are fastened by spring clamps and quick-release
coupling. |
t
| To fasten the fuel hoses to the engine use spring clamps only.
Using tightening clamps or screw is not allowed. |
t
| To install spring clamps, we recommend using the Standard-type
clamp pliers -VW 5162- or Standard-type
clamp pliers -VAS 5024A- or Clamp pliers -VAG 1921-. |
Removal and installation of the fuel tank → Chapter. |
Fuel tank components with accessories and fuel filter - remove
and install → Chapter. |
Repair engine power electronic adjustment parts (electric
accelerator) → Chapter. |
Repair the activated charcoal filter system components → Chapter. |
|
|
|