Polo Mk4
II - Clutch case |
1 - | Tapered screw |
q | 25 Nm |
2 - | Propelling flange with pressure spring |
3 - | Screw |
q | 5 Nm + 90° |
q | Always replace |
4 - | Clutch case |
q | Manufactured in aluminum or magnesium |
q | Correspondence → Electronic Parts Catalogue |
q | Repair → Chapter |
q | In case of replacement, always adjust differential → Chapter |
5 - | Transmission case |
q | Manufactured in aluminum or magnesium |
q | Correspondence → Electronic Parts Catalogue |
q | Repair → Chapter |
q | Apply Sealing putty -AMV 188 200 03- evenly on the sealing surface |
q | In case of replacement, always adjust differential → Chapter |
6 - | Clutch lever |
q | Remove and install with the bearing guide and clutch bearing |
7 - | Screw |
q | 5 Nm + 90° |
q | Always replace |