Polo Mk4
| Generator (Alternator) -C- for 1.0 and 1.6l (ARA, BPA, BAH) engines - assembly overview |
| 1 - | Support |
| 2 - | Voltage regulator -C1- |
| q | (Bosch) - disassemble and assemble → Chapter. |
| q | (Valeo) - disassemble and assemble → Chapter. |
| 3 - | Protection cover |
| 4 - | Generator (Alternator) -C- |
| q | Remove and install → Chapter. |
| q | Check the B+ cable connection → Chapter. |
| q | Replace the Poly-V belt pulley → Chapter. |
| 5 - | Poly-V belt |
| q | Remove and install → Engine; Rep. gr.13 |
| q | Check the Poly-V belt → Chapter. |
| q | Poly-V belt routing → Engine; Rep. gr.13. |
| 6 - | Screws |
| q | 23 Nm. |
| 7 - | Tensioning element |
