volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing fresh air blowerV2

Polo Mk5

Removing
Removing
First carry out the following work:
   
–  Remove glove compartment → Rep. gr.68.
–  Pull connector -2- off fresh air blower -V2-.
–  Carefully cut through cable ties -1- and -3-.
–  Disconnect connector -4- and release connector from fresh air blower housing -5-.
  S80-0102
–  Unscrew bolts -arrows- (1 Nm) and remove fresh air blower housing -5- from heater unit.
–  Press connector housing locking lugs -2- outwards (in direction of arrows) using a small screwdriver and slide connector -1- downwards out of catch.
–  Press rubber elements -3- inwards and downwards using screwdriver.
–  Pull blower motor along with fan wheel out of bracket.
  S80-0104

Installing > < Removing and installing fresh air blowerV2