volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Cleaning throttle valve moduleJ338 > < Assembly overview - air filter

Polo Mk5

Removing and installing air filter housing
Removing and installing air filter housing
Removing
   
–  Press catches -arrows- and pull air intake connecting piece out of air intake guide.
  N24-10322
–  Pull hose -1- off non-return valve.
–  Pull air filter housing upwards off locating pins -2-.
Installing
Install in reverse order. In the process, note the following:
  Note
t  Self-tapping screws are used as standard for securing air filter upper part to air filter lower part as well as for intake connecting pipe. When these screws are loosened or tightened using a power tool, the threads in the upper part of the air filter may be damaged.
t  Therefore, the use of a power tool can only be allowed when:
t  The maximum speed of the power tool is 200 rpm.
t  A specified torque of max 3 Nm is set.
  N24-10323
–  Press air filter housing onto locating pins -2- from above.
–  Fit hose -1- on non-return valve.
  N24-10323
–  Press air intake connecting piece into intake air duct until the fasteners -arrows- engage audibly.
  N24-10322

Cleaning throttle valve moduleJ338 > < Assembly overview - air filter