R32 4Motion V6-3.2L (CBRA) (2008)
Intake Manifold: Locations
Intake Manifold Assembly Overview
Intake manifold tuning (IMT) valve N156 connector.
1
-
Intake manifold
-
Intake manifold, removing and installing
2
-
From cylinder head cover
3
-
Crankcase vent valve
-
With Positive Crankcase Ventilation (PCV) heating element N79
4
-
Seal
-
Replace
5
-
10 Nm
6
-
Bearing cap
-
For change-over roller of intake manifold change-over
7
-
Seal
-
Replace
8
-
20 Nm
9
-
Low pressure connection
-
For brake booster
10
-
Low pressure connection
-
To exhaust flap valve 1 N321
11
-
Low pressure connection
-
To the vacuum reservoir
12
-
Rear intake manifold support
13
-
Low pressure connection
-
For evaporative emission (EVAP) canister purge regulator valve N80
14
-
Vacuum hose for Leak Detection Pump (LDP) V144
15
-
Non-return valve
-
Black connection faces toward T-piece
16
-
From exhaust flap valve 1 N321
17
-
Throttle valve control module J338