R32 4Motion V6-3.2L (CBRA) (2008)
-
Store Mechatronic properly
CAUTION! Never lift the Mechatronic by, or allow it to rest on, the sensor arm.
If the arm is damaged, the Mechatronic must be replaced.
Installing
Note:
^
Touch a grounded object before touching the Mechatronic.
^
Replace the Mechatronic if the sensor arm is damaged.
-
Carefully insert the Direct Shift Gearbox (DSG) Mechatronic J743 into the transmission housing:
-
Ensure the alignment pin -A- in the transmission housing -arrow 1- and the sensor arm -B- in the guide -arrow 2- are seated correctly on the
transmission housing.
-
Do not pinch the wire.