Rabbit L5-2.5L (BGP) (2006)
Control Assembly: Service and Repair
Air Distribution Control - Flexible Cable, Removing and Installing
Air Distribution Control - Flexible Cable, Removing And Installing
Removing:
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove radio
-
Remove glove compartment
-
Bring flexible cable into the following position:
-
Rotate air distribution rotary control knob -1- far enough until locking mechanism of shaft -2- is visible in gear drive -3-.
-
Remove heating and ventilation controls
-
Reach into center console and release retaining tab -1- by pressing in direction of -arrow-.
-
Pull cable from adapter -2-.
Installing:
Install in reverse order of removal, ensuring air distribution rotary control knob has not been moved from the positions as specified for removal.
NOTE: When installing flexible cable, adapter and rotary switches on heating and ventilation controls must be oriented in a specific manner.