Rabbit L5-2.5L (BGP) (2006)
-
Using a suitable screwdriver, press rear catch retaining tab -arrow A- back toward steering wheel to loosen catch.
-
Carefully pull Steering Column Electronic Systems Control Module J527 downward from steering column switches.
NOTE: When removing, ensure Steering Column Electronic Systems Control Module J527 is removed straight downward without tilting.
-
Disengage -arrow A- harness connector -1- and disconnect it from Steering Column Electronic Systems Control Module J527.
-
Remove securing latch -3- from harness connector -2-.
-
Disengage lock -arrow B- on electrical connection -2- and disconnect from Steering Column Electronic Systems Control Module J527.
Installing:
Install in reverse order of removal, noting the following:
NOTE: Ensure that no pins are bent and that the connector engages audibly when connecting the harness connectors.
Airbag Spiral Spring/Return Spring With Slip Ring F138, removing and installing
Removing:
NOTE: When removing, the spiral spring must not be twisted out of the center position and wheels must be in the "straight ahead position".
-
Lift straps -arrows- slightly at spiral spring -1- and remove spiral spring toward rear from steering column and steering column switches.
Installing:
Install in reverse order of removal, noting the following:
NOTE: When installing spiral spring, spiral spring must be in center position and wheels must be in the "straight ahead position".