Rabbit L5-2.5L (BGP) (2006)
Electronic Throttle Actuator: Service and Repair
Accelerator Pedal Module, Removing and Installing
Accelerator Pedal Module, Removing And Installing
Special tools, testers and auxiliary items required
-
Release tool T10238
Removing
-
Remove steering column cover - arrows -.
-
Pry out cover cap using a screwdriver.
-
Remove mounting bolt.
-
Slide release tool T10238 as shown into openings designated for it until it stops and remove accelerator pedal module.
-
Disconnect harness connector from accelerator pedal module.
Installing