Rabbit L5-2.5L (BGP) (2006)
Transmission Position Switch/Sensor: Service and Repair
Multi-Function Transmission Range (TR) Switch F125, Installing
Multi-Function Transmission Range (TR) Switch F125, installing 09G, 6 Speed A/T
Special tools, testers and auxiliary items required
^
Torque wrench VAG 1331
Installation is in reverse order of removal. Not the following:
-
Connect Multi-Function Transmission Range (TR) Switch - 4 - to selector shaft - 6 -.
-
Hand-tighten securing bolts - 5 - for multi-function switch.
-
Bend hooks of locking washer - 2 - back.
-
Install washers - 2 - and - 3 - onto selector shaft - 6 -.
-
Install washer - 2 - with hook pointing upward.
-
Install washer - 2 - with long narrow guides into long narrow recesses of selector shaft - 6 -.
-
Tighten nut - 1 - to 7 Nm.
-
Secure nut - 1 - on locking washer - 2 - by bending up hooks.
-
Replace locking washer if hooks are broken off.