Rabbit L5-2.5L (BGP) (2006)
-
Connect lever - 3 - to selector shaft - 4 -.
-
Shift transmission to position "P" using lever - 3 -, i.e. push lever - 3 - rearward against direction of travel until stop.
-
Now shift transmission into position "N" via lever - 3 -. To do so, press lever - 3 - two engaged positions toward front in direction of travel.
-
Install spring washer - 2 - and nut - 1 - onto selector shaft - 4 -.
-
Tighten nut - 1 - to 13 Nm.
Vehicles with 6 cyl. gasoline engine
-
Install engine coolant expansion tank.
-
Connect battery Ground (GND) strap with ignition switched off.
Continued for all vehicles
-
Check shift mechanism.