volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Procedures|Page 7284 > < Procedures|Page 7282
Page 1
background image

Shifter M/T: Removal and Replacement

Shift Mechanism, Installation Position

Shift mechanism, installation position 0A4, 5 Speed M/T

-

Arrow A - Gear movement

-

Arrow B - Selection movement

A - Shift cable for gear movement
B - Selector cable for selector movement
C - Heat shield
^

Remove before removing gear selector mechanism.

1 -

Transmission shift lever

2 -

Relay lever

Note: 
^

Note radio coding for vehicles with coded radio.

^

For work on shift mechanism in engine compartment, disconnect battery Ground (GND) strap.

^

If battery is re-connected, please note work after re-connecting battery.

^

When working on the selector mechanism in the engine compartment, remove the complete air filter housing, if it is located above the selector
mechanism.

^

To replace operating cables, remove shift mechanism.

^

Do not bend operating cables.

Procedures|Page 7284 > < Procedures|Page 7282