Rabbit L5-2.5L (BGP) (2006)
Wiper Arm: Service and Repair
Wiper Arms, Removing and Installing
Wiper Arms, Removing And Installing
Removing:
-
Wiper arms, removing.
Installing:
NOTE: Mounting nuts of wiper arms are to be tightened to tightening torque only after end position of windshield wiper blades has been set.
-
Deactivate APP function if not already done by this time.
-
With the ignition on, switch the windshield wipers on and off again to move the wiper motor into the park position.
-
Insert both wiper arms on the wiper arm shafts in the approximate end positions and screw on mounting nuts -arrows- hand-tight.
-
Adjust the windshield wiper blade park position.