Rabbit L5-2.5L (CBUA) (2008)
-
2 - connector for solenoid valves
-
Disconnect connector housing from transmission.
-
Disconnect connector housing together with wiring harness outward from transmission housing.
Installing
-
Replace sealing ring on connector housing.
-
Carefully guide wiring harness from outside into the transmission.
-
Coat connector housing sealing ring with ATF and then press connector housing all the way into transmission.
-
Connect connector housing.
-
Install valve body.
-
Remove oil strainer.
-
Install oil pan.
-
Add ATF, check ATF level and top off.