Rabbit L5-2.5L (CBUA) (2008)
Clutch Master Cylinder: Service and Repair
Master Cylinder
Master Cylinder - 0A4, 5 Speed M/T
Special tools, testers and auxiliary items required
^
Pliers T10005
Removing
-
Remove the mounting bracket.
-
Disengage master cylinder operating rod mount using pliers T10005.
-
Place spacer -A- between clutch pedal and stop and press clutch pedal toward spacer.
^
Length of spacer = approximately 40 mm (e.g. 1/2 " socket insert)
-
Release the retaining clip -B- and pull the master cylinder out of the mounting bracket -arrow 1- and -arrow 2-.
Installing
^
Move clutch pedal up to stop in rest position.